Extron Electronics DVI DA4 Setup Guide User Manual
Dvi da2 and dvi da4 setup guide, Step 1 — mounting, Step 2 — dvi input/output cable connections
DVI DA2 and DVI DA4 Setup Guide
These instructions provide a quick setup guide for the
Extron
®
DVI DA2 and DVI DA4. Installation and service must
be performed by authorized personnel only. To install, cable,
and power on the DVI DA2 and DVI DA4:
Step 1 — Mounting
Install the DVI DA2 or DVI DA4 on a desk, or mount it under a desk or in a rack.
Step 2 — DVI Input/Output Cable Connections
Connect these cables, but do not power on the equipment yet:
•
Connect a DVI cable from the Input connector to the video source device.
•
Connect a DVI cable from the Local Monitor connector to the desired local output device.
•
Connect DVI cables from the output connectors to the desired display devices.
12V
0.4A MAX
POWER
DVI-D INPUT
DVI-D OUTPUT
LOCAL MONITO
R
1
2
DVI DA2
Extron
DVI DA2
DVI Distribution
Amplifier
PC
Local Monitor
Flat Panel
Display