Xylem IM 06 Seal-less Centrifugal Canned Motor Pumps Plastic and Stainless Housing 60 Cycle (obsolete) - Manual

Installation & Operating Manual
Please read this manual carefully before attempting to install, operate or maintain the product described. Failure to
comply with the information provided in this manual could result in personal injury and/or property damage. Retain
this manual for future reference.
Laing Thermotech
Instruction Manual
INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.
Seal-less Centrifugal Canned Motor Pumps
Plastic and Stainless Housing 60 Cycle
Description
Laing centrifugal pumps are designed for circulation and transfer of a variety of fluids compatible with
their materials of construction limited to maximum fluid temperatures and maximum line pressures as
indicated below. Unique leakproof integrated motor/pump design eliminates the need for
conventional mechanical seals or other shaft sealing devices. They are self lubricating and require no
external lubrication.
Unpacking
When unpacking the unit inspect carefully for any damage that may have occurred during transit.
Check for loose, damaged, or missing parts (see pump exploded view and replacement parts list). Do
not attempt to assemble or operate pump if any parts are missing or damaged.
General Safety Information
1. Know the pump application, limitations and potential hazards.
2. Make certain that the power source conforms to the requirements of your equipment.
SM-303
SM-909-14(18,26)
SM-1212/1252-21(26)
Plastic Housing SM-303 Stainless Housing SM-909/1212
Plastic Housing SM-909/1212