Operation of the pumps – Xylem CONNECT Quick Guide User Manual

Page 15

Text mode
Original mode

Operation of the Pumps

This section is based on the function “Pump Control 1” which is the most
used Pump function.

Function Key 1 is the screen used for the pump control and will

typically be the same screen as in the Connect when working on the

station.

Please note that the pre-defined view described here can be customized to
your needs.

Select Function Key 1 for the daily use of the pump control 1.

Overview display 1 is standard and located in the function section Pump
Control 1. The most current pump information is displayed here: Actual level,
in use/not in use and the start/stop levels of the pump.

Note: If you leave Connect

with this setup, this will be the first you see on

the pump station at next visit.