YSI 3100 - Manual (Page 7)

3
The following diagram shows the typical display.
10.00
µ
S
24.8 °C
The [Mode] key is used to select the current display mode. Mode choices are conductivity,
temperature compensated conductivity or salinity. Temperature is always displayed at the bottom
of the screen.
Rear Panel
The rear panel contains the connections for the power supply and cell. It also has a mounting post
for the 3232 adapter as shown below.
@ 100ma
Power Supply Connection
The power supply connection requires a 12 VDC power supply (included) with at least 100 ma
current. The polarity is marked on the instrument.
Conductivity:
mS/cm
uS/cm
Temperature compensated conductivity:
mS/cm
uS/cm
Salinity:
ppt
Temperature: °C
Adapter mounting post
NOTE: Flashing °C symbol
indicates temperature
compensation is enabled.