Xylem Lab 970 - Manual (Page 50)

Operation Lab 970
50 ba75558e03 11/2009
4.9.2 Resetting meter settings
This function resets to the default condition meter settings. The
relevant values are given on the following pages:
The following settings are also reset to the default condition:
Resetting the meter
settings
System settings page 44
Measurement settings page 46
Setting Default settings
Measured variable
ӕ
mS/cm or µS/cm
Adjusted cell constant 0,650 1/cm
Temperature compensation nLF
Temperature coefficient of the
linear temperature
compensation 2.000 %/K
TDS factor 1.00
1 Switch on the meter with .
The display test appears briefly on the display.
2 During the display test, press to open the menu for
the reset of the meter settings.
Init is displayed.
3 Press <
▲><▼> to display no or YES.
YES: Reset the meter settings.
no: Retain the meter settings.
o n
t i n I