Acer TravelMate 6460 - Manual (Page 86)

68
English
Enabling or disabling Acer TPM security
Note: Before you enable or disable Acer TPM (Trusted Platform
Module), the supervisor password must have been set.
Activate the BIOS utility then select Security from the categories listed at the
top of the screen. Find Current TPM State at the bottom of the screen and use
the and keys to set this value to Enable & Activate or Deactivate &
Disable.
Your system will activate the BIOS utility automatically after rebooting, then
enter Acer TPM management security setup. Please select Execute to confirm or
Reject to skip your selection.
Note: During boot up additional time is required to initialize the
TPM layer, as a result you may find that boot times become
slightly longer with TPM enabled.