Acer Altos G701 User Manual
Page 85
75
Quiet Boot
Enables or disables the Quiet Boot
function. When set to Enabled, BIOS setup
is in graphical mode and displays only an
identification logo during POST and while
booting. After booting, the screen displays
the operating system prompt (such as DOS)
or logo (such as Windows 95). If any error
occurs while booting, the system
automatically switches to text mode.
Even if your setting is Enabled, you may
still switch to text mode while booting by
pressing the Delete key when you see the
"Press DELETE key to enter setup" message
on the screen.
When set to Disabled, BIOS setup is in the
conventional text mode where you see the
system initialization details on the screen.
Enabled
Disabled
Hyperthreading
Enable or disables the hyperthreading
function of the processor.
When enabled, one physical processor acts
as two logical processors by "threading"
two sets of data instructions in parallel
streams for processing. The processor can
then simultaneously manage incoming
data from different applications without
losing track of the data processing status
of each.
Enabled
Disabled
Boot up
Num Lock
Activates the Num Lock function upon
booting
On
Off
CPU Frequency
to Bus Ratio
Bus/bus ratio of the system. The clock
speed of the bus does not necessarily equal
the CPU’s. Mostly, the bus clock speed is
slower than the CPU clock speed.
16 to 1
PS/2 Mouse
Support
Enable this parameter if you intend to use
a mouse or trackball with a PS/2 interface.
Enabled
Disabled
Parity Check
If you enable this item, the system BIOS
will support an interrupt service routine
that handles NMI (Non-Maskable Inter-
rupt) for memory parity.
Disabled
Enabled
Parameter
Description
Option
AA G701 - EN.book Page 75 Monday, March 17, 2003 4:24 PM