Acer TravelMate C110 - Manual (Page 72)

3 Troubleshooting your computer 62
If you still encounter problems after going through the corrective
measures, please contact your dealer or an authorized service center
for assistance. Some problems may be solved using the BIOS Utility.
Operating system not found Operating system cannot be located on
either drive A: or drive C:. Enter Setup and
see if fixed disk and drive A: are properly
identified.
Parity Check 1 nnnn* Parity error found in the system bus. BIOS
attempts to locate the address and display it
on the screen. If it cannot locate the address,
it displays nnnn. Parity is a method for
checking errors in binary data. A parity error
indicates that some data has been corrupted.
Parity Check 2 nnnn* Parity error found in the I/O bus. BIOS
attempts to locate the address and display it
on the screen. If it cannot locate the address,
it displays nnnn.
Press to resume,
to Setup, for previous Displayed after any recoverable error
message. Press to start the boot process
or to enter Setup and change the
settings. Press to display the previous
screen (usually an initialization error of an
Option ROM, i.e., an add-on card). Write
down and follow the information shown on
the screen.
Run the I2O Configuration
Utility One or more unclaimed block storage
devices have the Configuration Request bit
set in the LCT. Run an I2O Configuration
Utility (e.g. the SAC utility).
Error Messages Corrective Action
TMC110-en.book Page 62 Monday, March 17, 2003 3:36 PM