Acer W701 - Manual (Page 16)

Your Acer computer tour 16
Englis
h
To insert the computer into the cradle, do the following:
1. Place the cradle in landscape view. Place the computer into the cradle’s
channel with the Windows key at the bottom. The cradle’s USB connector
and DC-out jack are now aligned with the computer’s USB port and DC-in
jack.
2. Slide the computer to the left until it stops (the cradle’s USB connector and
DC-out jack should NOT be visible).
To remove the computer from the cradle, do the following:
1. Place the cradle in landscape view. Hold the cradle with one hand and push
the computer as shown.