Acer Universal USB 3.0 Docking Station - Manual (Page 19)

16
Engl
ish
The LAN port (RJ-45) on the docking station does not work
after I plugged in the docking station.
This could be caused by following:
•
The docking station power adapter is not plugged in properly. Please
make sure the power adapter is plugged in properly to the power outlet
and the docking station.
• The LAN cable is not correctly connected. Please ensure the LAN (RJ-
45) cable is plugged in properly.
• The drivers are not correctly installed. Please install the driver from the
Driver CD and reboot your system before reconnecting your LAN
cable.
What graphics interface that USB docking station support?
The provided docking station driver includes a software-based graphics
driver. Not all hardware acceleration methods are available to applications.
The table below provides more support information.
* With Windows Aero enabled.
The screen is blank when playing protected content.
Many factors may cause this issue, such as:
Interface Windows XP Windows Vista / Windows 7*
DirectX 10 No Yes, if supported by the primary graphics card.
DirectX 9 No Yes, but full screen mode is not available. It
displays only in window mode.
DirectX VA No Yes, if supported by the primary graphics card.
Direct 3D No Yes, but not available when the docking station
is set as the primary display.
DirectDraw Yes Yes
OpenGL No Yes, but full screen mode is not available. It
displays only in window mode.
GDI+ No Yes, but full screen mode is not available. It
displays only in window mode.