Acer ACP45 USB port replicator - Manual (Page 16)

16
Acer Port Replicator
4 Plug your optical cable (not included) into the
S/PDIF-Out port of Port Replicator on one end, and
the S/PDIF-In port of Digital Decoder or Speaker on
the other end.
5 Connect your Digital Decoder or Speaker to the Home
Theater System.
Global Suspend
Mode
When your computer is in suspend mode, the port
replicator also enters suspend mode to avoid power
consumption. When your computer wakes up, the port
replicator wakes up automatically.
Always On
The two USB ports that provide up to 1Amp of power will
continue providing power even when the laptop is
powered down or disconnected from the port replicator.
This allows you to charge any USB device you may have
connected.
Using USB Devices
That Require More
Power
Some devices, which use large amounts of power, such
as printers and optical drives, should be plugged into the
High Power USB Ports. These ports will provide up to
1000mA of power - double the power of a standard USB
ports.