Acer ACP45 USB port replicator - Manual (Page 12)

12
Acer Port Replicator
Connecting a Parallel
Printer
To connect a parallel printer:
1 Attach the cable connector to the parallel port on the
port replicator.
2 Go to Start button of your Window OS, and click on
Printers and Faxes. Add your printer driver by
following the instructions of the Add Printer Wizard.
Connecting a PDA
1 Attach the cable connector to the serial port on the
port replicator.
2 Verify that the COM port setting, in either your
HotSync
®
or ActiveSync
®
software, matches the
setting on the port replicator.
To verify the COM port setting on the port replicator,
refer to “Verifying Devices are Installed” on page 18.
To verify the COM port setting on your PDA, refer to
the documentation that came with it.
Connecting to a Local
Area Network
To connect an Ethernet cable with an RJ-45 connector,
attach the cable connector to the Ethernet/network port
on the port replicator. Additional procedures to connect to
an actual network depend on the type of network you are
using. Contact your network administrator for detailed
instructions.