Xoro HSD 8430 - Manual (Page 66)

16
Engl
ish
BASIC CONNECTIONS
When DVD discs recorded in DOLBY digital, MPEG audio or other formats are played, cor-
responding bit stream is output from the player OPTICAL and COAXIAL digital audio output
connector. When the player is connected to an external decoder or a power amplifier, you
can enjoy theater-quality at your home.
Notes when connecting the optical digital cable:
Remove the protective cap from the connector, insert the plug-ins of DVD and amplifier
optical slot so that the configurations of both the cable and the connector match. Keep the
protective cap and always reattach the cap when not using the connector to protect against
dust and laser beam.
Concerning the audio output setting for the unit
1 Sound having 96 KHZ sampling is converted to 48 KHZ sampling when it is output from the
coaxial digital audio output connector.
Notes:
Please set the digital output as RAW
Caution for the coaxial/optical digital audio output connector:
Do not connect an amplifier with a Coaxial or optical digital input connector) which does not
contain the Dolby digital or MPEG audio decoder otherwise it may be harmful to your ears
and damage your speakers.
HD resolutions:
This DVD Player reads information (EDID) from the TV to extract data such as type of TV
(HDMI) and resolution, and configures the DVD resolutions accordingly.
Connections to an external power amplifier
Disc Sound recording format Digital output setting
DVD Dolby Digital •
PCM (44.1 kHz sampling) 1
•
RAW
•
OFF
DVD DTS •
RAW
•
OFF
DVD Linear PCM PCM (44.1 kHz sampling)
CD Linear PCM PCM (44.1 kHz sampling)
DVD Other PCM (44.1 kHz sampling)