Xoro HSD 8430 - Manual (Page 61)

11
Engl
ish
Connecting to a TV
BASIC CONNECTIONS
Ensure that the power switch of this unit and other equipment to be connected is turned off
before commencing connection.
Read through the instructions before connecting other equipment.
Ensure that you observe the colour-coding when connecting audio and video cords.
Please use only one kind of connection with TV set for the unit and choose correct video
output setting, otherwise there may be image distortion.
To get better viewing quality, you are advised using S-video cord to connect the TV set with
S-video input meanwhile changing the TV set to S-video input format.
The TV set with Y, Cb, Cr input can get more clear picture and realistic image when it con-
nects to Y, Cb, Cr output jacks of this player. The Video out setting must be set as YUV if
you use Y, Cb, Cr output.
Notes:
1.
Choose below speaker setting in the Audio menu if you use the TV speaker.
•
Front: Large
•
Center/Rear/Subwoofer: OFF
At this setting situation which is Stereo effect, the signal from Audio output L, R is
the same as the FL, FR output, also the same as the audio signal from Scart jack.
2. Only one kind of connection to the TV set can be made. If your TV set does not sup-
port Y Pb Pr function, do not switch the VIDEO OUT to Y Pb Pr of the unit, otherwise
there will be no picture output.
Connecting to a stereo TV set by YUV
Audio Output (left)
Audio Output (right)
DVD player
TV
Component Video Output