C2G 29572 WIRELESS USB TO VGA ADAPTER KIT User Manual
Page 21

20
W
IRELESS
USB
H
OST
A
DAPTER
S
ELECTION
The “HOST” button on the Wireless VGA Device Adapter is used to switch between Wireless USB Host
Adapters. By pressing this button, the Wireless VGA Device Adapter will look for the next associated
Wireless USB host adapter in its list and connect to it. The 1-2-3 lights indicate which host is connected
and will move position based on which host is currently associated. The LED scheme is as follows:
Wireless USB Host Adapter Reset
To erase all Wireless USB host adapters associated to your Wireless VGA Device Adapter, hold down the
“RESET” button for 10 seconds. This will cause the Wireless VGA Device Adapter to erase all Wireless
USB host adapters that have been associated from its list. Each Wireless USB host adapters will then
have to be re-associated with the Wireless VGA Device Adapter using one of the association processes
(cable or pin association) in order to connect to the Wireless VGA Device Adapter again.
Light Light Light
User 1
On
Off
Off
User 2
Off
On
Off
User 3
Off
Off
On
User 4
On
On
Off
User 5
Off
On
On
User 6
On
Off
On
U
SING THE
W
IRELESS
USB
T
O
VGA
A
DAPTER
K
IT