English, Specifications trouble shooting guide – Xoro HSD 710 User Manual
Page 120

Power supply (V)
Power consumption
9W
Weight (device + battery)
1. kg
Dimensions (W x H x D)
190 mm x 30 mm x 155 mm
DAC
Audio 24 bit /96 Khz, Video 10 bit
Frequency response
+/ 1 dB
Audio s/n ratio
> 90 dB
Audio distortion
> 65 dB
Audio output level
1.4 V
Video output
450 lines
Panel size
7", 16:9
Panel resolution
1440 x 234
Playback time with battery
up to 150 minutes
Operating conditions
10 +60 °C
100 240V AC 50/60Hz
8
120
English
SPECIFICATIONS
TROUBLE SHOOTING GUIDE
Symptom
No power
No picture /
sound
Interference or
scrolling
The player
doesn t start
playback
Correction
3308
Check if AC adapter of power is connected securely.
If powered with the battery, check if it is exhausted.
Make sure the connection is in good condition; volume is not too low;
audio receiver or TV work normally; audio setting is in proper.
Check TV type is correct: PAL/NTSC.
Due to the effect of copy protection. Avoid connecting to a VCR or TV/Vcr
combination.
Adjust the vertical hold on your TV.
Remove the plastic laser pickup protection on the disk tray.
The DVD+/ RW you played should be finalized, and not be an empty disc.
Place the disc with the graphic side up and make sure it s inside the
guide.
Make sure the disc is free from scratches & fingerprints.
Insert a playable disc. (Check the disc type and color system).
Do not playback a disc which region code is different from that of your
player.
Clean the disc.
Cancel the parental lock function or change the parental lock level. (The
Pre set password is
).
Reset the player.