AVSL 178.856 QX15PA - Manual (Page 5)

QXPA User Manual
Internal USB/SD/FM player-recorder
Insert a USB memory stick or an SD card with compressed digital audio files stored on it into
the relevant slot on the rear panel.
If the LCD display reads “LINE IN”, press the USB/SD button and check that the LCD display
shows that media is being read from the USB or SD device. If not, press the “>II” button or
try removing and re-inserting the memory device.
Increasing the VOLUME control should result in the audio being played through the speaker.
Panel controls are detailed below…
“MODE”
switches input between internal USB/SD/FM and AUX input
“VOL – “ press and hold to decrease volume
“I<<” momentary press for previous track / FM station
“VOL +” press and hold to increase volume
“>>I” momentary press for next track / FM station
“REC” Enter record mode
“>II” Play / pause track – hold for auto channel search in FM mode
In addition to the panel controls, an infra-red remote control is provided for the USB/SD player
which adds some further functions to allow greater control over the media player. To operate,
remove the clear plastic tab from the remote to activate the battery.
1. Player on/standby
2. Not used
3. Transport / FM channel select controls
4. Volume controls
5. EQ preset select
6. Source select button
7. Repeat function
8. Numerical track/memory access buttons