AVSL 952.409 PAV8 - Manual (Page 3)

952.409UK User Manual
Rear Panel Main Controls
Powering up
Your new PAV8 portable PA unit may arrive with you with the internal battery charged. Before connecting to
the mains, switch POWER switch (20) on and see if the POWER indicator (19) lights. If not, you will need to
charge the battery before using away from a mains supply.
Connect the PAV8 to mains supply using the supplied 15Vdc adaptor to the DC power inlet (15). When not in
use but connected to the mains, if the POWER switch is in the OFF position, the internal battery will be re-
charged from the mains supply. This can be observed by the “CHARGING” LED (18) which lights when
charging. When the battery has achieved full charge, the “FULL” LED (17) will light.
Please note: The internal battery may lose charge over long periods. If the PAV8 is not used for 2 months or
longer, connect the supplied 15Vdc power adaptor to the mains to charge the battery.
Turn all rotary controls down except for BASS and TREBLE controls (4, 5), which should remain pointing
vertically upwards (12-o-clock position). Turn the POWER switch on (the power LED should light). Turn up the
leftmost VOLUME control (3) part way and insert a CD/DVD disc, USB pen drive or SD card into the player and
press the PLAY button (see below for further operation instructions if necessary). Increase the “DVD VOL”
control (7) whilst checking the output. The audio track should be heard through the PAV8 speaker.
Adjust the volume, bass and treble controls as required.
1 VHF A antenna connection
2 VHF A RF indicator
3 Main VOLUME control
4 BASS control
5 TREBLE control
6 ECHO control
7 DVD VOL control
8 AUX VOL control
9 MIC VOL control
10 VHF B RF indicator
11 VHF B antenna connection
12 AUX IN RCA connectors
13 AUX OUT RCA connectors
14 VIDEO OUT RCA connector
15 DC15V IN power inlet
16 MIC IN jack connector
17 FULL battery indicator
18 CHARGING indicator
19 POWER indicator
20 POWER on/off switch