AVSL 100.060 DT2.18BT - Manual (Page 3)

100.060UK User Manual
INSTALLATION:
Please read through this manual carefully before setup.
Please ensure both mains and speaker power is switched off before setup.
- Connect satellite speakers to the main unit’s RCA output.
- Connect supplied fig.8 power lead to the power input of the main unit.
- Connect music source into RCA line input, use the 2 x RCA to 3.5mm adaptor lead provided if
the music source only has 3.5mm output.
- Plug power lead to mains socket and switch on both mains and speaker.
OPERATION:
FM Radio:
To start up FM radio function please follows these steps:
- Press INPUT button on the front panel of the main unit or Mode from the remote control until
FM frequency is displayed on the LCD display screen.
- Pressing PLAY/PAUSE will automatically search through all frequencies and register all available
channels.
- Once search is finished, the radio will automatically select the radio station that is broadcasting
on the lowest frequency. To change station press Previous/Next on the front of the unit.
- If there is poor FM signal in the area, extend the telescopic antenna and move until you receive
the best reception.