Troubleshooting – AVSL 170.145 BC4A User Manual
Page 4
170.145, 170.146 User Manual
Troubleshooting
No output and Power LED not lit
Check rotary switch is not set to “Off”
Check mains adapter is connected and in good
condition
Check mains outlet is on
Power LED lit but no output
Turn up rotary control
Check signal lead is connected properly
Check sound source is playing
Sound output only from one speaker
Check speaker wire is connected from active to
satellite properly
Check signal lead is connected properly
Output is very low
Turn up rotary control
Check sound source is turned up
Output is too loud or distorted
Turn down rotary control
Check sound source output is not too high for
input
DISPOSAL:
Please dispose of the unserviceable device according to the current statutory requirement
Errors and omissions excepted.
Copyright© 2012. AVSL Group Ltd.