beautypg.com

AVSL 154.091 DM-X10 User Manual

Page 8

background image

8

154.091UK User Manual

3.3.5 Editing a Program

Scenes will need to be modified manually

Action:

1. Press and hold the PROGRAM button until the LED blinks

2. Use BANK UP/DOWN buttons to change Program banks if necessary

3. Select the desired fixture via the FIXTURES button

4. Move faders to adjust parameters to the required setting for the fixture(s)

5. Press the MIDI/ADD button to prepare the save

6. Select a SCENE to store the scene

3.3.6 Copy a Program

Action:

1. Press and hold the PROGRAM button until the LED blinks

2. Use BANK UP/DOWN buttons to change Program bank to be copied

3. Press the MIDI/ADD button to prepare the copy

4. Use BANK UP/DOWN buttons to change the destination Program bank

5. Press the MUSIC BANK COPY button to copy to the new destination. All LEDs will blink to confirm

3.4 Chase Programming

A chase is created by using previously created scenes. Scenes become steps in a chase and can be

arranged in any order you choose. It is highly recommended that prior to programming chases for the

first time; you delete all chases from memory.

See Delete All Chases

for instructions.

3.4.1 Create a Chase

A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.

Action:

1. Press and hold the PROGRAM button until the LED blinks

2. Press the CHASE (1-6) button you wish to program

3. Change BANK if necessary to locate a scene

4. Select a SCENE to insert

5. Press the MIDI/ADD button to store
6. Repeat steps 3 ~ 5 to add additional steps in the chase. Up to 240 steps can be recorded.
7. Hold the PROGRAM button to save the chase

3.4.2 Running a Chase

Action:

Press a CHASE button then press the AUTO DEL button.

Adjust the Chase speed by tapping the TAP DISPLAY button twice at a rate of your choosing

Note: The time between 2 taps will set the chase speed (up to 10 minutes)

3.4.3 Checking a Chase

Action:

1. Press and hold the PROGRAM button until the LED blinks

2. Select the desired CHASE button

3. Press the TAP/DISPLAY button to switch the display to step view

4. Use BANK UP/DOWN buttons to review each scene in the chase