AVSL 154.091 DM-X10 - Manual (Page 6)

6 154.091UK User Manual
3.2 Operation
3.2.1 Manual Mode
The manual mode allows direct control of all fixtures. You are able to move them and change
attributes by using the channel faders.
Action
1. Select a FIXTURE button
2. Press the AUTO DEL button repeatedly until the MANUAL LED is lit.
3. Move the faders to change parameters for the selected fixture(s)
PAGE/SELECT A/B button: Use to switch between fader control pages (A: Ch1~8), (B: Ch 9~16)
TAP DISPLAY button: Press to toggle the output indicator on the LCD display between DMX values
(0-255) and percentage (0-100)
Note: All changes made within MANUAL mode will be temporary and will not be recorded
3.2.1 Review Scene or Chase
This instruction assumes that you have already recorded scenes and chases on the controller.
Otherwise skip this section and go to programming.
Action (SCENE review)
1. Select a SCENE button (1-8) to review
2. Select any one of the 30 banks by pressing the BANK UP/DOWN buttons
3. Move faders to change fixture attributes
Action (CHASE review)
1. Select a CHASE button (1-6) to review
2. Press the TAP DISPLAY button to view the step number on the display
3. Press the BANK UP/DOWN buttons to review all scenes in the chase
Note: Make sure you are still in MANUAL mode