AVSL 154.090 DM-X3 - Manual

DM-X3
RGB PAR Can DMX Controller
Item ref: 154.090UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Controller for LED RGB products such as PAR cans and Lighting bars that have the first three DMX channels set to Red,
Green and Blue. The controller features six preset colours, a sound-to-light mode, and pre-set colour changing sequences
while also being about to adjusting the flash sensitivity.
Control Layout
1. COLOUR BUTTONS When COLOUR SELECT is active select a pre-set static colour from these options
2. HOLD COLOURS Stops any colour change or fade and holds the current colour until deactivated
3. COLOUR SELECT Press to activate the HOLD COLOUR or manual RGB Faders
4. PROGRAM SELECT Activates the Pre-set programs selected by FADER 1COLOUR SELECT PROGRAM SELECT
5. FADER 1 Adjusts red brightness or selects the internal program in program mode
6. FADER 2 Adjusts green brightness or selects the sequence speed in AUTO mode
7. FADER 3 Adjusts blue brightness or selects the strobe speed in AUTO mode
8. MIC Internal microphone for sound activation
9. AUTO Auto colour change. Use FADER 2 and FADER 3 toadjust change speed and strobe effect
10. SOUND ACTIVE Sound activated mode. FADER 3 adjusts microphone sensitivity
11. BLACKOUT Turns all light output off