AVSL 160.462 ORB-400 User Manual

Page 5

160.462UK User Manual

Troubleshooting

Warning: Hot components! ... Switch off and allow to cool before touching the unit.

No light on mains

switch

Check mains voltage is correct and socket is switched on
Check IEC lead is OK and connected properly
Check mains fuse in IEC connector and fuse in plug top
If fuse blowing repeatedly, refer to qualified service personnel

Ready light stays off

Check remote is connected properly
If light is permanently off, refer to qualified service personnel

Ready light is on but

no haze output on

manual or

continuous

Check fog fluid level
If fluid is OK and pump working, the lines may be blocked
Check that nozzle is not blocked or obstructed
If blocked, clean with fog machine cleaner & distilled water

No haze output on

timer function

Ensure timer button is pressed in and timer LED is lit
Check interval, duration and output control settings – test manually if necessary

No bubble output

Ensure bubble fluid level is enough to cover the wands as they turn through the bath
Check bubble wand wheel is turning – press button on keyfob remote to activate
If keyfob remote doesn’t work, check button cell inside and replace if necessary
Check that the wireless receiver is plugged in correctly

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful
life. The goods must be disposed of according to your local council guidelines

Errors and omissions excepted.