Armasight TFT227MN9PS2400 FLIR Scout PS24 240x180 monocular 7.5Hz, NTSC - Manual (Page 12)

3—Operating Your Scout PS-Series Camera Scout PS-Series Operator’s
8 October 2011
When the highest brightness level is reached, subsequent button
presses advance to the next lower brightness levels. When the lowest
brightness level is reached, subsequent button presses advance to
the next higher brightness level. One of the following icons is displayed
for approximately 3 seconds after the button is pressed indicating the
current brightness level:
Note
White Hot/Black Hot/Instalert™ Button
Use this button to toggle between the two video and
the four Instalert color palettes. In the default White
Hot palette, hotter objects appear as white or light
grey. In Black Hot, hotter objects appear as black or
dark grey. In the Instalert™ palettes the hottest
objects in the scene are highlighted in red to simplify detection of
animals, people, and objects. There are four pre-set levels of Instalert
that you can select based on the specific scene being viewed. All of the
Instalert palettes are based on the white hot palette.
While white hot is the most commonly used and visually intuitive
method of viewing thermal imagery; black hot can often enhance
contrast of certain objects or provide better visual perspective in
some conditions. When switching between palettes, the appropriate
icon is displayed for approximately 3 seconds.
When the Scout PS-Series camera is powered Off, the Display
Brightness button, when held on, turns on the LED Tasklight.
Highest Lowest
Black hot White hot Instalert™ 1 – 4
Scout_Operators.book Page 8 Monday, October 10, 2011 12:33 PM