Asus P5QC - Manual (Page 87)

ASUS P5QC 3-19
3.4.9 DRAM Write Training [Auto]
Enable this function to optimize the DRAM Write Data Timing. Disabling this
function may help enhance DRAM overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]
3.4.10 MEM. OC Charger [Auto]
Enabling this function may help enhance DRAM overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]
3.4.11 Ai Clock Twister [Auto]
Allows you to set the DRAM performance. Set this item to [Light] or [Lighter]
to enhance DRAM compatibility, or [Strong] or [Stronger] to accelerate DRAM
performance.
Configuration options: [Auto] [Lighter] [Light] [Moderate] [Strong] [Stronger]
3.4.12 Ai Transaction Booster [Auto]
Allows you to set the system performance.
Configuration options: [Auto] [Manual]
The following two sub-items appear only when you set the Ai Transaction
Booster item to [Manual].
Common Performance Level [05]
Set this item to a higher level for better compatibility or a lower level for better
performance. Use the <+> and <-> keys to adjust the value. The values
range from 1 to 31.
Pull-In of CHA/B PH1/2 [Disabled]
Set this item to [Enabled] to apply enhancement on DRAM Channel A and B,
Phase 1 to 2. The number of phases is determined by DRAM frequency and
FSB strap.
Configuration options: [Disabled] [Enabled]
The following ten (10) items are adjusted by typing the desired values using
the numeric keypad and press the key. You can also use the <+> and
<-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the key.
3.4.13 CPU Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 0.85000V to
2.10000V* with a 0.00625V interval.