beautypg.com

Asus ESC2000 Personal SuperComputer User Manual

Page 62

background image

Chapter 4: Motherboard information

4-8

6. iBTN RAID setting (3-pin IBTN_SEL1)

This jumper allows you to select the RAID configuration utility to use when

you create disk arrays. Place the jumper caps on pins 1–2 if you install a

PIKE RAID card to the motherboard and want to use the LSI Logic MPT

Setup Utility (default). Or you can place the jumper caps on pins 2–3 to create

the LSI Mega RAID 5 supported by Intel

®

ICH10R SATA controller.

• LSI Logic MPT Setup Utility is available only when you install a PIKE RAID

card.

• LSI Mega RAID 5 fucntion is available only when you place the iBTN to

I_BTN1 slot and install an optional ASUS PIKE RAID card.