Using the objects command – Asus ESC2000 Personal SuperComputer User Manual

Page 128

6-14

Chapter 6: RAID configuration

Using the Objects command

To initialize the virtual drives using the

Objects command

1. From the

Management Menu, select Objects > Virtual Drive, and then

press .

Management Menu

Configure

Initialize

Objects

Rebuild

Check Consistency

Change VD Parameters

Objects

Adapter

Virtual Drive

Physical Drive

LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008

BIOS Version A.08.09161344R

Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option

2. Select the virtual drive to initialize from the

Virtual Drives sub-menu, and

then press .

Management Menu

Configure

Initialize

Objects

Rebuild

Check Consistency

Select VD

Objects

Adapter

Virtual Drive

Physical Drive

Vitual Drive(1)

Virtual Drive 0

LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008

BIOS Version A.08.09161344R

Press ENTER To Select A VD, ~~To Delete A VD~~