Asus ESC2000 Personal SuperComputer - Manual (Page 104)

5-30 Chapter 5: BIOS setup
5.4.11 ACPI Configuration
Advanced ACPI Configuration
ACPI 2.0 Support [Enabled]
Specifies the Advanced Configuration and Power Interface (ACPI) version
supported. Configuration options: [Disabled] [Enabled]
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When
set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
BIOS-->AML ACPI table [Enabled]
Allows you to include the BIOS-->AML exchange table pointer to (X)RSDT pointer
list. Configuration options: [Disabled] [Enabled]
Headless mode [Disabled]
Allows you to enable or disable the Headless operation mode through ACPI.
Configuration options: [Disabled] [Enabled]
BIOS SETUP UTILITY
Advanced
Advanced ACPI Configuration
ACPI 2.0 Support [Enabled]
ACPI APIC support [Enabled]
BIOS-->AML ACPI table [Enabled]
Headless mode [Disabled]
Add additional tables
as per ACPI 2.0
specifications.
BIOS SETUP UTILITY
Advanced
ACPI Settings
Advanced ACPI Configuration
Chipset ACPI Configuration
General WHEA Configuration
Advanced ACPI
Configuration
settings.
Use this section to
configure additional
ACPI options.
Chipset ACPI Configuration
BIOS SETUP UTILITY
Advanced
South Bridge ACPI Configuration
APIC ACPI SCI IRQ [Disabled]
USB Device Wakeup From S3/S4 [Disabled]
High Performance Event Timer [Enabled]
HPET Memory Address [FED00000h]
Enabled/Disable
APIC ACPI SCI IRQ.