Asus P1-PH1 - Manual (Page 78)

5-20 Chapter 5: BIOS setup
5.5.1 APM configuration
This menu shows the Advanced Power Management (APM) configuration
settings. Select an item then press to display a pop-up menu with
the configuration options.
Select Menu
Item Specific Help
Power Up By Ring [Disabled]
Power Up By PS/2 Mouse [Disabled]
Power Up By PS/2 Keyboard [Disabled]
Restore on AC Power Loss [Power Off]
x Power On By Button Enabled
Video Off Option [Suspend -> Off]
Power On by PCI Devices [Disabled]
Power On By RTC Alarm [Disabled]
x Date(of Month) Alarm 0
x Time(hh:mm:ss) Alarm 0:0:0
APM Configuration
Power Up By Ring [Disabled]
Allows you to enable or disable system power up when the external
modem receives a call while the computer is in soft-off mode.
Configuration options: [Disabled] [Enabled]
Power Up By PS/2 Mouse [Disabled]
Allows you to enable or disable system power up by PS/2 Mouse.
Configuration options: [Disabled] [Enabled]
Power Up By PS/2 Keyboard [Disabled]
Allows you to enable or disable system power up by PS/2 Keyboard.
Configuration options: [Disabled] [Space Bar] [Ctrl-ESC] [Power Key]
Restore on AC Power Loss [Power Off]
Allows you to set whether or not to reboot the system after power
interruptions. [Power Off] leaves your system off, [Power On] reboots the
system, and [Last State] sets the system back to the state it was before
the power interruption. Configuration options: [Power Off] [Power On]
[Last State]
Power On By Button [Enabled]
This item appears only when the Power Up By PS/2 Keyboard item is set
to [Space Bar] or [Ctrl-ESC]. Configuration options: [Disabled] [Enabled]