Asus M4A88T-M LE - Manual (Page 57)

ASUS M4A88T-M LE 2-15
2.4.2 CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the FSB Frequency. Use the
<+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU
model.
The following two items only appear when you install a 6-core CPU.
AMD Turbo CORE technology [Enabled]
Enables or disables the AMD Turbo Core technology. Configuration options: [Disabled]
[Enabled]
Turbo CORE Ratio [Auto]
Sets the Turbo Core ratio. Use the <+> / <-> keys to adjust the ratio. The valid value ranges
vary depending on your CPU model. Configuration options: [Auto]
2.4.3 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency. Configuration options: [Auto] [800MHz]
[1067MHz] [1333MHz] [1600MHz]
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.4.4 CPU/NB Frequency [Auto]
Allows you to set the ratio between the NB Clock and the CPU Bus Frequency. Configuration
options: [Auto] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
2.4.5 HT Link Speed [Auto]
Allows you to select the HyperTransport link speed. Configuration options: [Auto] [200MHz]
[400MHz] [600MHz] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz]
[2000MHz]
2.4.6 GPU OverClocking [Auto]
Allows you to configure the GPU overclocking settings. Configuration options: [Auto] [Manual]
GPU Engine Clock [700]
This item appears only when you set the GPU OverClocking item to [Manual] and
allows you to set the GPU Engine Clock. Use the <+> and <-> keys to adjust the value.
You can also key in the desired value using the numeric keypad. The values range
from 200MHz to 2000MHz.