Asus P8H67-M LX - Manual (Page 47)

Chapter 2: BIOS information 2-18
2.5.6 Super IO Configuration (for P8H67-M LX only)
Serial Port Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).
Configuration options: [Enabled] [Disabled]
Change Settings [Auto]
Allows you to select the Serial Port base address. Configuration options: [IO=3F8h;
IRQ=4] [IO=3F8h; IRQ= 3,4,5,6,7,9,10,11,12;] [IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12]
[IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12] [IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12]
Parallel Port Configuration
The sub-items in this menu allow you to set the parallel port configuration.
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT/LPTE).
Configuration options: [Enabled] [Disabled]
Change Settings [Auto]
Allows you to select an optimal setting for Super I/O devices. Configuration
options: [Auto] [IO=378h; IRQ=5;] [IO=378h; IRQ=5,6,7,9,10,11,12;] [IO=278h;
IRQ=5,6,7,9,10,11,12;] [IO=3BCh; IRQ=5,6,7,9,10,11,12;]
Device Mode [Standard Parallel Port Mode]
Allows you to select the Printer Port mode. Configuration options: [Standard Parallel
Port Mode] [EPP Mode] [ECP Mode] [EPP & ECP Mode]
2.5.7 Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled] Enables the High Definition Audio Controller.
[Disabled] Disables the controller.
The following item appears only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD] Sets the front panel audio connector (AAFP) mode to high definition audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
Allows you to select the digital audio output type. Configuration options: [SPIDF] [HDMI]