Asus M4N78 - Manual (Page 52)

2-14 ASUS M4N78
SouthBridge Configuration
Primary Graphics Adapter [PCIE -> PCI]
Display Device Priority, from high to low. Configuration options: [PCIE -> PCI] [PCI -> PCIE]
PCIE 2.0 Support [Auto]
Allows you to enable or disable the PCIE 2.0 feature. Configuration options: [Disabled] [Auto]
AZALIA AUDIO [Enabled]
Allows you to enable or disable the HD audio mode. Configuration options: [Disabled]
[Enabled]
Front Panel Select [HD Audio]
Allows you to set HD Audio mode. Configuration options: [AC97] [HD Audio]
Onboard LAN [Enabled]
Allows you to set or disable the Onboard LAN. Configuration options: [Enabled] [Disabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the OnBoard LAN Boot ROM.
Configuration options: [Enabled] [Disabled]
SouthBridge ACPI HPET TABLE [Enabled]
Allows you to enable or disable SouthBridge ACPI HPET TABLE.
Configuration options: [Disabled] [Enabled]
2.4.4 Onboard Devices Configuration
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allows you to select the Parallel Port mode. Configuration options: [Normal] [EPP] [ECP]
[EPP+ECP]
2.4.5 PCI PnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA
devices, and setting the memory size block for legacy ISA devices.
Plug and Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if
you install a Plug and Play operating system, the operating system configures the Plug and
Play devices not required for boot. Configuration options: [No] [Yes]