Asus M3A76-CM - Manual (Page 55)

Chapter 2: BIOS setup 2-17
Boot Settings Configuration
Security
Specifies the Boot
Device Priority
sequence.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Boot Device Priority
Boot Settings
2.6.1 Boot Device Priority
1st ~ xxth Boot Device
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system. Configuration options: [Removable Dev.] [Hard Drive] [ATAPI CD-
ROM ] [Disabled]
2.6.2 Boot Settings Configuration
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to
decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the
POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature. Configuration
options: [Disabled] [Enabled]
Fan Auto Mode Full Speed Temp [55ºC]
Allows you to set the smart Q-Fan full speed temperature. Configuration options: [51ºC]
[52ºC] [53ºC] ... [74ºC] [75ºC]
2.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item then
press to display the submenu.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
AddOn ROM Display Mode [Force BIOS]
Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]