Asus M5A78L-M LX3 - Manual (Page 34)

6. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
M5A78L-M LX3
M5A78L-M LX3 USB2.0 connectors
PIN 1
USB+5V USB_P6
-
USB_P6
+
GND NC
USB+5V USB_P5
-
USB_P5
+
GND
USB56 USB78
PIN 1
USB+5V USB_P8
-
USB_P8
+
GND NC
USB+5V USB_P7
-
USB_P7
+
GND
7. CPU and chassis fan connectors (4-pin CPU_FAN and 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
Only the 4-pin CPU fan connector supports the ASUS Fan X-pert feature.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! DO NOT
place jumper caps on the fan connectors.
CHA_FAN
CPU_FAN
CPU
FA
N PW
M
CPU
FA
N IN
CPU
FA
N PW
R
GN
D
M5A78L-M LX3
M5A78L-M LX3 fan connectors
GND
+12V
Rotation
Chapter 1: Product introduction 1-24