Asus CUV4X-C - Manual (Page 17)

ASUS CUV4X-C User’s Manual 17
3. HARDWARE SETUP
Motherboard Frequency Settings (DIP Switches - DIP_SW)
The motherboard frequency is adjusted through the DIP switches. The white block
represents the switch’s position. The example below shows all the switches in the
OFF position.
CUV4X-C DIP Switches
ON
1 2 3 4 5 6 7 8 OFF
ON
< F
requency Multiple
< Frequency Multiple < Frequency Multiple < Frequency Multiple < Frequency Selection < Frequency Selection < Frequency Selection < Frequency Selection
®
CUV4X-C
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
Setting JEN
Enable (JumperFree) [2-3] (default)
Disable (Jumper) [1-2]
®
CUV4X-C
CUV4X-C JumperFree™ Mode Setting
Jumper
Mode
JumperFree
Mode
(Default)
2 3
JEN
1 2
ON
1 2 3 4 5 6 7 8
OFF
DIP_SW
NOTE: In JumperFree™ mode, set all DIP switches (DIP_SW) to OFF.
3. H/W SETUP
Motherboard Settings