Asus asmb3-sol plus 2-17 – Asus ASMB3-SOL PLUS User Manual
Page 31
ASUS ASMB3-SOL PLUS
2-17
System Event Log (list mode)
Press
F1
Help
↑↓
Select Item
-/+
Change Values
F9
Setup Defaults
ESC:
Exit
→←
Select Menu
Enter
Select Sub-menu
F10
Save and Exit
System Event Log (list mode)
Event ID
Sensor Name
Sensor Type
Date/Time Stamp
------------------------------------------------------------------------------
001
CPU2temperature1
Temp
04/17/2006 16:10:44
Upper Non-critical Going High, Assertion
002
CPU2temperature1
Temp
04/17/2006 16:10:44
Upper Critical Going High, Assertion
003
CPU2temperature2
Temp
04/17/2006 16:10:44
Upper Non-critical Going High, Assertion
004
CPU2temperature2
Temp
04/17/2006 16:10:44
Upper Critical Going High, Assertion
005
DIMM_01 AMB temp
Temp
04/17/2006 16:10:44
Lower Non-critical Going Low, Assertion
006
DIMM_01 AMB temp
Temp
04/17/2006 16:10:45
Upper Critical Going Low, Assertion
PhoenixBIOS Setup Utility
Main Advanced Server Security
Boot Exit
F1 Help ↑↓
Select Item
-/+
Change Values
F9
Setup Defaults
ESC:
Exit
→←
Select Menu
Enter
Select Sub-menu
F10
Save and Exit
[0001 CPU2temperature1 Temp 04/17/2006 16:10:44 ]
SEL Entry Number =
1
SEL Record ID =
0001
SEL Record Type =
02-System Event Record
Timestamp =
04/17/2006 16:10:44
Generator Id =
20 00
SEL Message Rev =
04
Sensor Type =
01 - Temperature
Sensor Number =
32 - CPU2temperature1
SEL Event Type =
01 - Threshold
Event Description =
Upper Non-critical Going High, Assertion
SEL Event Data =
57 80 50
PhoenixBIOS Setup Utility
Main Advanced Server Security
Boot Exit
Choose an event ID, then press
DHCP
Allows you to enable or disable DHCP.
• If you set DHCP to [Disabled], then it will turn into static mode.
• Setting DHCP to [Enabled] allows you to get the IP assigned by DHCP
server. The response time might take around one minute depending on the
DHCP server and network traffic status.
• For taking effect of the changes, press
the BIOS setup program.
IP Address
Allows you to provide information to set the BMC IP address.