Asus ASMB3-SOL PLUS - Manual (Page 27)

ASUS ASMB3-SOL PLUS 2-13
4. Press , then select IPMI Configuration sub-menu from the Server
menu.
5. Use this sub-menu to adjust the remote server LAN settings or view the
System Event Log (SEL).
6. When finished, press to save your changes and exit the BIOS setup.
2.4.2 Phoenix BIOS setup
Console Redirection setup
To adjust the Console Redirection settings:
1. Restart the remote server, then press during POST to access the BIOS
setup.
2. Go to the Server menu, select the Console Redirection sub-menu, then press
.
3. Set the following sub-menu items:
• Com Port Address to [On-board COM B] or [On-board COM2 port]
• Baudrate to [57.6K]
• Console Type to [VT-UTF8]
• Flow Control to [CTS/RTS]
• Console connection to [Direct]
• Continue C.R. after POST to [On]*
• # of Pages to Support to [1]
* Set to [On] if you use Console Redirection in DOS mode; set to [Off] if you use
Console Redirection in the console mode of Linux or Windows ® OS.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC: Exit →← Select Menu Enter Select Sub-menu F10 Save and Exit
Item Specific Help
If enabled, it will use a
port on the motherboard.
Console Redirection
Com Port Address [On-board COM B]
Baud Rate [57.6K]
Console Type [VT-UTF8]
Flow Control [CTS/RTS]
Console Redirection [Direct]
Continue C.R. after POST [On]
# of video pages to support [1]
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit