Asus M4A77D - Manual (Page 38)

CPU_FAN
GND CPU
FA
N PW
R
CPU
FA
N IN
CPU
FA
N PW
M
M4A77D
M4A77D fan connectors
GND +12V Rotation
CHA_FAN
8. CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
Only the 4-pin CPU fan supports the ASUS Q-Fan feature.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! DO NOT
place jumper caps on the fan connectors.
9. IEEE 1394a connector (10-1 pin IE1394_1)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable
to this connector, then install the module to a slot opening at the back of the system
chassis.
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the
motherboard!
The IEEE 1394a module is purchased separately.
M4A77D
M4A77D
IEEE 1394a Connector
PIN 1
TPA1- GND TPB1- +
12
V
GND
TPA1+
GND
TPB1+
+12V
IE1394_1
Chapter 1: Product introduction 1-28