Intel, P8h67-m2/tpm/si intel, Sata 3.0gb/s connectors – Asus P8H67-M2/TPM/SI User Manual
Page 24: P8h67-m2/tpm/si speaker connector, Speaker
ASUS P8H67-M2 Series
1-14
• These connectors are set to [IDE Mode] by default. In IDE mode, you can connect Serial
ATA boot/data hard disk drives to these connectors. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode].
See section 2.5.4 SATA Configuration for details.
• Before creating a RAID set, refer to the RAID Supplementary Guide included in the
folder named Manual in the support DVD.
• You must install Windows
®
XP Service Pack 3 or later version before using Serial ATA
hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if
you are using Windows
®
XP SP3 or later version.
• When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI Mode].
See section 2.5.4 SATA Configuration for details.
7.
Intel
®
H67 Serial ATA 3.0Gb/s connectors (7-pin SATA1~4 [blue])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
8.
Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
GN
D
RSATA_TXP
1
RSATA_TXN1
GN
D
RSATA_RXP
1
RSATA_RXN1
GN
D
SATA3G_1
SATA3G_3
GN
D
RSATA_TXP
3
RSATA_TXN3
GN
D
RSATA_RXP
3
RSATA_RXN3
GN
D
GN
D
RSATA_RXN2
RSATA_RXP2
GN
D
RSATA_TXN2
RSATA_TXP2
GN
D
GN
D
RSATA_RXN4
RSATA_RXP4
GN
D
RSATA_TXN4
RSATA_TXP4
GN
D
SATA3G_2
SATA3G_4
P8H67-M2/TPM/SI
P8H67-M2/TPM/SI Intel
®
SATA 3.0Gb/s connectors
P8H67-M2/TPM/SI
P8H67-M2/TPM/SI
Speaker connector
+5
V
GN
D
GN
D
Speaker Ou
t
SPEAKER
PIN 1