Asus P5S-B - Manual (Page 19)

III. HARDWARE SETUP
ASUS P5S-B User’s Manual 19
Motherboard Settings
III. H/W SETUP
6. LCD Setting (DIP 2 – Switch 10)
If you want to connect an LCD monitor to your computer, you must set this
switch to Enable to use it. See LCD Header in External Connectors for con-
nection information.
NOTE: This setting is available only on motherboards with
the optional Digital Flat Panel (DFP) support.
P5S-B LCD Setting
DIP 2
Enable
Disable
(Default)
ON 12345678
9
10
ON 12345678
9
10
0 1
7. TV Out Setting (DIP 2 – Switch 9)
This lets you select the signal that is inputted to your TV when using the op-
tional TV Out connector. Select AV for a composite input or RGB for an RGB
input.
NOTE: This setting is available only on motherboards with the optional
SCART interface support.
P5S-B TV Out (SCART) Setting
DIP 2
RGB
ON 12345678
9
10
ON 12345678
9
10
AV
0 1