Asus P5QPL-VM - Manual (Page 71)

ASUS P5QPL-VM 2-23
North Bridge Configuration
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
North Bridge chipset Configuration
Memory Remap Feature [Enabled]
Configure DRAM Timing by SPD [Enabled]
Initiate Graphic Adapter [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
GTT Graphics Memory Size [No VT mode, 2MB]
DVMT Memory [256MB]
Protect Audio Video Path Mode [Lite]
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configuring DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
Allows you to select the amout of system memory used by the IGD graphics
device. Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB]
[Enabled, 128MB]
DVMT Memory [256MB]
Allows you to select the DVMT memory. Configuration options: [128MB] [256MB]
[Maximum DVMT]
The [Maximum DVMT] option only appears when installing 1GB DDR2 DIMMs
into the DIMM sockets.
Protect Audio Video Path Mode [Lite]
Allows you to set the Protected Audio Video Path (PAVP).
Configuration options: [Disabled] [Lite] [Paranoid]