Asus P5K Deluxe/WiFi-AP - Manual (Page 37)

3-20
3.3.5 Setting up ad-hoc of the station mode
This section describes how to set up WiFi-AP Solo as an Ad-hoc node and let
other wireless station to connect, and how to connect an existing Ad-hoc node.
Setting up WiFi-AP Solo as an Ad-hoc node
1. Open the setup utility and
click the Config button. Select
Profile Manager tab. Click Add
button to create a profile.
2. Set up the operation
channel and the
wireless network
security settings.
When configuration is
complete, click Finish
to apply the settings
and return to the utility.
The WiFi-AP Solo is
an Ad-hoc node now.
3. The default IP address of WiFi-AP
Solo is 192.168.0.1. To modify the
IP address for your WiFi-AP Solo,
double-click the wireless icon in the
system tray -> click Properties ->
double-click Internet Protocol (TCP/
IP).
Refer to Appendix for the available wireless LAN channels in your country
or region.