Asus RS700-E7/RS8 User Manual
Page 139
ASUS RS700-E7/RS8
6-25
The utility supports maximum four hard disk drives for RAID configuration.
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
1. If you want to use SAS HDD for RAID create, be sure you’ve already
correctly installed the optional Intel ASRK module on the motherboard.
2. The RAID BIOS setup screThe RAID BIOS setup screens shown in this
section are for reference only and may not exactly match the items on your
screen.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1104
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[
MAIN MENU
]
1. Create RAID Volume
3. Reset Disks to Non-RAID
2. Delete RAID Volume 4. Exit
[
DISK/VOLUME INFORMATION
]
RAID Volumes:
None defined.
Physical Disks:
ID Drive Model Serial # Size Type/Status(Vol ID)
0 ST3300656SS HWAS0000991753TR 279.3GB
Non-RAID Disk
1 ST3300656SS 37VN00009846RAJ1 279.3GB
Non-RAID Disk
2 ST3300656SS 397600009846UEDY 279.3GB
Non-RAID Disk
3 ST3300656SS GWC50000991756G6 279.3GB
Non-RAID Disk
[↑↓]-Select
[ESC]-Exit [ENTER]-Select Menu
To enter the Intel
®
Rapid Storage Technology enterprise SCU Option ROM utility:
1. Install all the Serial ATA/SAS hard disk drives.
2. Turn on the system.
3. During POST, press