Asus RS700-E7/RS8 - Manual (Page 113)

ASUS RS700-E7/RS8 5-49
User Password
If you have set a user password, you must enter the user password for accessing
the system. The User Password item on top of the screen shows the default Not
Installed. After you set a password, this item shows Installed.
To set a user password:
1. Select the User Password item and press .
2. From the Create New Password box, key in a password, then press
.
3. Confirm the password when prompted.
To change a user password:
1. Select the User Password item and press .
2. From the Enter Current Password box, key in the current password, then
press .
3. From the Create New Password box, key in a new password, then press
.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password,
but press when prompted to create/confirm the password. After you clear
the password, the User Password item on top of the screen shows Not Installed.
To clear the administrator password, follow the same steps as in changing an
administrator password, but press when prompted to create/confirm the
password. After you clear the password, the Administrator Password item on top
of the screen shows Not Installed.
5.10 Tool menu
The Tool menu items allow you to configure options for special functions. Select an
item then press to display the submenu.
Be used to update BIOS
ASUS EZ Flash 2 Utility
ASUS EZ Flash 2 Utility
Allows you to run ASUS EZ Flash BIOS ROM Utility when you press .
Check section 4.1.2 ASUS EZ Flash 2 Utility for details.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Server Mgmt Event Logs Boot Monitor Security Tool Exit