Asus SK8V - Manual (Page 86)

4-24 Chapter 4: BIOS Setup
USB 1.1 Ports Configuration [USB 8 Ports]
Allows you to set the number of USB ports to activate.
Configuration options: [Disabled] [USB 2 Ports] [USB 4 Ports]
[USB 6 Ports] [USB 8 Ports]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 ports controller.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices.
Setting to Auto allows the system to detect the presence of USB
devices at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps)
or Full Speed (12 Mbps). Configuration options: [HiSpeed ] [Full
Speed]
USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press Enter to display the configuration options.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Module Version : 2.23.0-7.4
USB Devices Enabled : None
USB 1.1 Ports Configuration [8 USB Ports]
USB 2.0 Controller [Enabled]
Legacy USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
USB Configuration
Enables USB host
controllers.
The Module Version and USB Devices Enabled items show the auto-
detected values. If no USB device is detected, the item shows None.