Asus M2A-MX - Manual (Page 71)

ASUS M2A-MX 2-23
Channel Interleaving [Auto]
Allows you to enable or disable channel memory interleaving.
Configuration options: [Disabled] [Auto] [Reserved] [Reserved] [Reserved]
Enable Clock to All DIMMs [Disabled]
Allows you to enable or disable the Unused Clocks to DIMMs Even Memory
Slots are not populated. Configuration options: [Disabled] [Enabled]
MemCLK Tristate C3/ATLVID [Disabled]
Allows you to enable or disable the MemCLK Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable the Memory Remapping Around Memory
Hole.Configuration options: [Disabled] [Enabled]
Unganged Mode support [Enabled]
Allows you to enable or disable the Force Unganged mode.
Configuration options: [Disabled] [Enabled]
Power Down Enable [Enabled]
Allows you to enable or disable the DDR power down mode.
Configuration options: [Disabled] [Enabled]
Power Down Mode [Channel]
Allows you to set the DDR power down mode.
Configuration options: [Channel] [Chip Select]
DRAM Timing Configuration
DRAM Timing Configuration
Memory Clock Mode [Auto]
DRAM Timing Mode [Auto]
Memory Voltage [1.890V]
Options
Auto
Limit
Manual
Memory Clock Mode [Auto]
Allows you to select the memory clock mode.
Configuration options: [Auto] [Limit] [Manual]
DRAM Timing Mode [Auto]
Allows you to select the DRAM timing mode.
Configuration options: [Auto] [DCT 0]
Memory Voltage [Auto]
Allows you to set the memory voltage. Configuration options: [1.890V]
[1.940V] [1.990V] [2.040V] [2.090V] [2.140V] [2.190V] [2.240V]