Asus M2A-MX - Manual (Page 70)

2-22 Chapter 2: BIOS setup
Memory Configuration
Memory Configuration
Bank Interleaving [Disabled]
Channel Interleaving [Auto]
Enable Clock to ALL DIMMs [Disabled]
MemCLK Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
Unganged Mode support [Enabled]
Power Down Enable [Enabled]
Power Down Mode [Channel]
Enable Bank Memory
Interleaving
NorthBridge Configuration
2.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
NorthBridge Cofiguration
Internal Graphics
Memory Options &
Information
NorthBridge Chipset Configuration
Memory Configuration
DRAM Timing Configuration
Alternate VID [Auto]
Memory CLK :333 MHz
CAS Latency(Tcl) :5.0
RAS/CAS Delay(Trcd) :5 CLK
Row Precharge Time(Trp):5 CLK
Min Active RAS(Tras) :15 CLK
RAS/RAS Delay(Trrd) :3 CLK
Row Cycle (Trc) :21 CLK
Bank Interleaving [Disabled]
Allows you to enable or disable the Bank Memory Interleaving.
Configuration options: [Disabled] [Auto]