Asus Pundit P2-PE2 - Manual (Page 65)

5 - 1 7 5 - 1 7 5 - 1 7 5 - 1 7 5 - 1 7 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2
5.4 Advanced menu
The Advanced menu items allow you to change the settings for the CPU
and other system devices.
CPU Speed [Manual] CPU Speed [Manual] CPU Speed [Manual] CPU Speed [Manual] CPU Speed [Manual]
Allows you select the CPU internal frequency. You can select either one of
the preset speeds, [2000MHz] or [2667MHz], or select [Manual] if you
wish to adjust the setting manually. Configuration options: [Manual]
[2000MHz] [2667MHz]
The CPU speed parameter is non-configurable when you install a locked CPU.
Memory Frequency [Auto] Memory Frequency [Auto] Memory Frequency [Auto] Memory Frequency [Auto] Memory Frequency [Auto]
Determines whether the memory clock frequency is set to be in
synchronous or asynchronous mode with respect to the system frequency.
The options that appear in the pop-up menu vary according to the CPU/PCI
Frequency (MHz). Configuration options: [Auto] [266MHz] [333MHz]
BIOS Update [Enabled] BIOS Update [Enabled] BIOS Update [Enabled] BIOS Update [Enabled] BIOS Update [Enabled]
Functions as an update loader integrated into the BIOS to supply the
processor with the required data. When set to [Enabled], the BIOS loads
the update on all processors during system bootup.
Configuration options: [Enabled] [Disabled]
PS/2 Mouse Function Control [Auto] PS/2 Mouse Function Control [Auto] PS/2 Mouse Function Control [Auto] PS/2 Mouse Function Control [Auto] PS/2 Mouse Function Control [Auto]
The default setting [Auto] allows the system to detect a PS/2 mouse at
startup. If a mouse is detected, the BIOS assigns IRQ12 to the PS/2 mouse.
Otherwise, IRQ12 can be used for expansion cards. When you set this field
to [Enabled], BIOS reserves IRQ12, whether or not a PS/2 mouse is
detected at startup. Configuration options: [Auto] [Enabled]