Asus Pundit P2-PE2 - Manual (Page 25)

2 - 9 2 - 9 2 - 9 2 - 9 2 - 9 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2 A S U S P u n d i t - P E 2
2.6 Installing a DIMM
The system motherboard comes with two Double Data Rate (DDR) Dual
Inline Memory Module (DIMM) sockets. These sockets support up to 2 GB
system memory using unbuffered non-ECC PC2700/2100/1600 DIMMs.
To install a DDR DIMM:
1. Locate the two DIMM sockets
on the motherboard.
2. Unlock a socket by pressing
the retaining clips outward.
4. Firmly insert the DIMM into
the socket until the retaining
clips snap back in place and
the DIMM is properly seated.
3. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on
the socket.
3 A DDR DIMM is keyed with
a notch so that it fits in
only one direction. DO
NOT force a DIMM into a
socket to avoid damaging
the DIMM.
1 1 1 1 1
2 2 2 2 2
2 2 2 2 2
3 3 3 3 3
4 4 4 4 4
4 4 4 4 4